Configuration Example: Static Routes
Figure 7-1 shows the network topology for the configuration that follows, which shows how to configure static routes using the commands covered in this chapter.
Note:
The host name, password, and interfaces have all been configured as per the configuration in the Chapter 6 configuration example.
Boston Router
Boston>en | | Boston#config t | | Boston(config)#ip route 172.16.30.0 255.255.255.0 172.16.20.2 | Configures a static route using the next-hop address | Boston(config)#ip route 172.16.40.0 255.255.255.0 172.16.20.2 | | Boston(config)#ip route 172.16.50.0 255.255.255.0 172.16.20.2 | | Boston(config)#exit | | Boston#copy run start | |
Buffalo Router
Buffalo>en | | Buffalo#config t | | Buffalo(config)#ip route 172.16.10.0 255.255.255.0 s1 | Configures a static route using the exit interface | Buffalo(config)#ip route 172.16.50.0 255.255.255.0 s0 | | Boston(config)#exit | | Boston#copy run start | |
Bangor Router
Bangor>en | | Bangor#config t | | Bangor(config)#ip route 0.0.0.0 0.0.0.0 s1 | Configures a static route using the default route | Bangor(config)#exit | | Bangor#copy run start | |
 |
